Best SCO 090-077 test training guide

After the advent of the DumpLeader's latest SCO certification 090-077 exam practice questions and answers, passing SCO certification 090-077 exam is no longer a dream of the IT staff. All of DumpLeader's practice questions and answers about SCO certification 090-077 exam have high quality and 95% similarity with the real exam questions. DumpLeader is worthful to choose. If you choose DumpLeader's products, you will be well prepared for SCO certification 090-077 exam and then successfully pass the exam.

SCO certification 090-077 exam is one of the many IT employees' most wanting to participate in the certification exams. Passing the exam needs rich knowledge and experience. While accumulating these abundant knowledge and experience needs a lot of time. Maybe you can choose some training courses or training tool and spending a certain amount of money to select a high quality training institution's training program is worthful. DumpLeader is a website which can meet the needs of many IT employees who participate in SCO certification 090-077 exam. DumpLeader's product is a targeted training program providing for SCO certification 090-077 exams, which can make you master a lot of IT professional knowledge in a short time and then let you have a good preparation for SCO certification 090-077 exam.

Exam Code: 090-077
Exam Name: SCO (UNIXWARE 7 ACE RECERTIFICATION V10A1)
One year free update, No help, Full refund!
Total Q&A: 58 Questions and Answers
Last Update: 2013-11-02

DumpLeader IT expert team take advantage of their experience and knowledge to continue to enhance the quality of exam training materials to meet the needs of the candidates and guarantee the candidates to pass the SCO certification 090-077 exam which is they first time to participate in. Through purchasing DumpLeader products, you can always get faster updates and more accurate information about the examination. And DumpLeader provide a wide coverage of the content of the exam and convenience for many of the candidates participating in the IT certification exams except the accuracy rate of 100%. It can give you 100% confidence and make you feel at ease to take the exam.

Since SCO 090-077 certification is so popular and our DumpLeader can not only do our best to help you pass the exam, but also will provide you with one year free update service, so to choose DumpLeader to help you achieve your dream. For tomorrow's success, is right to choose DumpLeader. Selecting DumpLeader, you will be an IT talent.

090-077 Free Demo Download: http://www.dumpleader.com/090-077_exam.html

NO.1 Which three port monitors are provided on UnixWare 7 systems?
A. init (1M), liload (1M), and ttyadm (1M)
B. init (1M), liload (1M), and ttymap (1M)
C. init (1M), llistat (1M), and ttyadm (1M)
D. inetd (1Mtcp), listen (1M), and ttymon (1M)
Answer: D

SCO study guide   090-077   090-077

NO.2 Which command line creates a character special device file with a major number=19 and a minor
number=1?
A. mknod /dev/devicename c 19 1
B. mknod /dev/devicename c 1 19
C. mkdev /dev/devicename c 19 1
D. mkdev /dev/devicename c 1 19
Answer: A

SCO exam simulations   090-077 original questions   090-077 certification training   090-077 exam prep   090-077 dumps

NO.3 Which statement is false?
A. The vxfs filesystem supports the creation of 2 terabyte file sizes by default.
B. The vxfs filesytem supports the creation of up to 2 gigabyte file sizes by default.
C. The vxfs filesystem supports a 4 kilobyte logical block size.
D. The vxfs filesystem supports an 8 kilobyte logical block size.
Answer: A

SCO Bootcamp   090-077 Bootcamp   090-077

NO.4 How many hard disk slices are created by default?
A. 16
B. 32
C. 64
D. 128
Answer: A

SCO demo   090-077   090-077 exam prep

NO.5 Which file controls the re-use of a user ID?
A. /etc/skel/ageduid
B. /etc/default/idage
C. /etc/security/ia/ageduid
D. There is not a file that controls the re-use of a user ID. After a user is deleted it is not possible to re-use
an ID.
Answer: C

SCO test questions   090-077 exam simulations   090-077 questions   090-077 exam prep   090-077 test questions   090-077

NO.6 Which command can you use to display the attributes of any disk device?
A. devattr (1M)
B. displaypkg (1M)
C. diskcfg (1M)
D. dodisk (1M)
Answer: A

SCO dumps   090-077   090-077 dumps   090-077 test   090-077 test questions

NO.7 Which serial communications ports does UnixWare 7 recognize by default ?
A. COM 1 only
B. COM 2 only
C. COM1 and COM2
D. COM1, COM2, COM3, and COM4
Answer: D

SCO test questions   090-077 original questions   090-077   090-077   090-077 Bootcamp

NO.8 In which file can you add or change default boot parameters?
A. /stand/bfs.blm
B. /stand/boot
C. /stand/smallfs.blm
D. /stand/stage3.blm
Answer: B

SCO test questions   090-077 questions   090-077 pdf   090-077   090-077 test questions

NO.9 How many detected hard disks can you create partitions and filesystems on during the installation of
the UnixWare 7 operating system?
A. Eight (8)
B. Six (6)
C. Four (4)
D. Two (2)
Answer: D

SCO   090-077   090-077 test questions

NO.10 How many partitions can you define on the first hard disk during the installation of the UnixWare 7
operating system?
A. One (1)
B. Two (2)
C. Three (3)
D. Four (4)
Answer: D

SCO   090-077   090-077 test   090-077 test answers   090-077

NO.11 Every UnixWare 7 system with TCP/IP has a network routing table within the kernel. Which field is NOT
contained in a routing table entry?
A. Netmask
B. Broadcast Address
C. Destination IP address
D. Network interface
Answer: B

SCO exam dumps   090-077   090-077 test questions   090-077 exam

NO.12 When running the fdisk (1M) command and selecting se whole disk for UNIX, which statement is true?
A. Any existing partitions are destroyed and the UNIX partition is marked active.
B. Any existing partitions are destroyed and you must manually activate the partition.
C. Any existing partitions are NOT destroyed and the UNIX partition is marked active.
D. Any existing partitions are NOT destroyed and you must manually activate the partition.
Answer: A

SCO Bootcamp   090-077   090-077 Bootcamp

NO.13 Which command can you use to check the accuracy of installed files and compare them to the
contents of the /var/sadm/install/contents file?
A. pkgadd (1M)
B. pkgchk (1M)
C. pkginfo (1M)
D. pkgtrans (1M)
Answer: B

SCO certification   090-077   090-077 test questions   090-077

NO.14 Which two serial device files support software flow control?
A. /dev/term/00m and /dev/term/00h
B. /dev/term/00m and /dev/term/00s
C. /dev/term/00m and /dev/term/00t
D. /dev/term/00s and /dev/term/00t
Answer: D

SCO exam prep   090-077 test questions   090-077 braindump   090-077 exam simulations

NO.15 Which of the following can you NOT use the Boot Command Processor (BCP) to accomplish?
A. Display or change default boot parameters
B. Enter single-user state
C. Load another UNIX kernel
D. Start the print service
Answer: D

SCO   090-077   090-077 practice questions   090-077 demo

NO.16 Which command do you use to create a set of emergency floppy diskettes?
A. diskadd (1M)
B. disksetup (1M)
C. emergency_disk (1M)
D. emergency_rec (1M)
Answer: C

SCO exam prep   090-077   090-077   090-077 pdf   090-077

NO.17 Which of the following actions occur when you choose se default disk operations?during the installation
of UnixWare 7?
A. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is NOT
configured.
B. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is configured.
C. A new boot sector installs, the disk is scanned for bad blocks, and the disk geometry is NOT
configured.
D. A new boot sector installs, the disk is NOT scanned for bad blocks, and the disk geometry is
configured.
Answer: A

SCO   090-077 certification training   090-077 dumps   090-077

NO.18 If it exists, in which hard disk slice is the PDINFO (Physical Disk Information) stored?
A. The boot slice
B. The dump slice
C. The var slice
D. The volume management public slice
Answer: C

SCO   090-077   090-077 Bootcamp

NO.19 Which answer describes the correct order in which diskadd (1M) invokes commands to configure
additional disks?
A. fdisk (1M), mkfs (1M0, and disksetup (1M)
B. disksetup (1M), fdisk (1M), and mkfs (1M)
C. fdisk (1M), disksetup (1M), and mkfs (1M)
D. None of the above.
Answer: C

SCO exam dumps   090-077 pdf   090-077 original questions   090-077

NO.20 What is the maximum vxfs (VERITAS) filesystem size?
A. 2 terabytes
B. 1 terabyte
C. 2 gigabytes
D. 1 gigabyte
Answer: B

SCO   090-077 test answers   090-077 study guide

DumpLeader offer the latest 70-483 exam material and high-quality C_TERP10_65 pdf questions & answers. Our 70-486 VCE testing engine and C_TSCM62_65 study guide can help you pass the real exam. High-quality 000-614 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/090-077_exam.html